Flap-11S Economical Magnetic Level Indicator
  • Flap-11S Economical Magnetic Level Indicator
  • Flap-11S Economical Magnetic Level Indicator
  • Flap-11S Economical Magnetic Level Indicator
  • Flap-11S Economical Magnetic Level Indicator

Flap-11S Economical Magnetic Level Indicator is practical and economical. It is made of 304 stainless steel and suitable for mild corrosive liquids. The chamber with 51mm diameter is made of high quality 304 seamless stainless-steel tube. It effectively avoids the common problems of conventional stainless-steel tube, such as leakage, insufficient pressure endurance, poor appearance and short life time. Besides, Jiwei has developed innovative technologies, introduced strict process management and quality inspection to ensure Flap-11S with great reliability.

Flap-11 Magnetic Level Indicator series products are designed based on the law of equilibrium in U connected vessels and coupling magnetic effect to achieve real-time level measurements and display. The level indicator is attached to the vessel and connects directly with the fluid to be measured. Within the chamber is a magnet float assembly inside. This float rests on the fluid surface and moves up and down with the change of level. Because of coupling magnetic effect, float with a permanent magnet actuates magnetic interacted flaps in the visual indicator which is mounted beside the chamber. Associated bi-color magnetic flaps will flip 180 degrees to indicate the actual liquid level. Generally, when liquid level rises, the float moves up and makes associated flaps flip from white to red, and when liquid level drops, the flaps flip from red to white. The interface between red and white flaps is the actual indicated liquid level inside the vessel.

● Distinctive design with broader visual indicator and magnetic flaps greatly increases both visual distance and viewing angle. The larger sharp scale and digits make the indicator easily readable, even from visible distance of 60 meters.

● Exceeds national standard of IP54, Ingress Protection IP65 and IP66/67 are selectable.

● Magnetic Switch, Compact Magnetic Switch and Remote Transmitter all qualified with SIL2 / SIL3 Functional Safety Assessment, as well as certified for both Intrinsic Safety and Flameproof Enclosure explosion protection.

● Made of 304 seamless stainless-steel tubes, economical and practical.

Applicable liquidDensity0.45~2g/cm³
Viscosity≤200cp
Measurement parametersRangeSingle section: 200~5600mm,multi-section up to 20m or longer
Accuracy±5mm or ±10mm
Materials and specificationsChamber304, φ51,thickness TBD according to process pressure and process temperature
Float304, 316L, available in F46 (FEP) out-lined
Visual indicatorAluminum or PA66 nylon. Front cover available in glass panel (standard) or acrylic sheet
Installation conditionsProcess pressureVacuum~10MPa
Process temperature-40~350℃
Ambient temperature-40~80℃
OutputSwitch signalMagnetic switch::220VAC 3A,SPDT
Continuous signalRemote transmitter:4~20mA
Process connectionConnectionFlange with customized dimension
Connection material304
End fittingUpper ventStandard flat welding cap. Flange, cocks, and 1 / 2”NPT ball valve available upon request
Lower drainStandard 1 / 2” NPT ball valve. Flange and cocks available upon request
AccessorySteam jacketCustomize
Electric heaterCustomize
Thermal insulatorRubber foam, asbestos, polyester
Vacuum jacketAnti-frost, for temperature lower than -5℃
Certificates and approvalsSIL QualificationSIL2(HFT≥0)/SIL3(HFT≥1)
Ingress ProtectionIP65, IP66/IP67
Explosion-ProofFlameproof Enclosure:Ex d IIC T6 Gb(Magnetic switch and Remote transmitter) Intrinsic Safety:Ex ia IIC T6 Ga(Magnetic switch and Remote transmitter)

● Hydrogenator off-gas condensate tank and alkali evaporator in hydrogen peroxide apparatus.

● Water tank in an electrolysis workshop.

● Level measurement in water tanks of various industrial apparatus.

Flap-11S Economical Magnetic Level Indicator
WhatsApp